Garden Art

STK068

Mild Steel Garden Stakes

These garden stakes stand 2000mm high and are gorgeous as a single abstract feature or can be placed together in groups scattered throughout the garden.

Each stake is sold separately.

GA034

This Bird of Paradise Pot sculpture is made of raw steel which will rust over time to develop it's own unique patina.

1700mm tall

BRO001

Mild Steel Garden Stake

1250mm high

STK025

Mild Steel Garden Stake

This cat stake is 400mm wide, sits 300mm above ground level with a stake that goes down approximately 150mm into the ground.

GA024

Mild Steel

130mm wide

GA025

Mild Steel

90mm wide

DOL001

Dragonfly on large leaves.
This sculpture is made of mild steel and will rust.
The leaves stand approximately 600mm tall

STK028

Mild Steel Garden Stake

This duck stake is 350mm wide, sits 350mm above ground level with a stake that goes down approximately 150mm into the ground.

STK057

Mild Steel Garden Stakes

This mother duck with her seven ducklings are perfect staked in the lawn, beside a dam or along a garden bed.

The mother duck stake is 400mm wide, sits 300mm above ground level with a stake that goes down approximately 150mm into the ground.

The ducklings are 200mm wide, sits 160mm above ground level with a stake that goes down approximately 150mm into the ground.

EAT001

Eagle on a tree.
This sculpture is made of mild steel and will rust.
The sculpture stands approximately 1200mm tall

ECH001

Mild Steel Garden Stake

This Echidna stake is 340mm wide, sits 230mm above ground level with a stake that goes down approximately 200mm into the ground.

FLD001

Flower Leaves with Dragonfly.
This Sculpture is mad from mild steel which will rust over time to develop it's own patina.
This flower stands 750mm tall.

FLR001

This Garden sculpture stands about 700mm tall and is made from Mild Steel, which will rust over time givig it a rich red colour.

FLN001

This Frill Neck Lizard is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Frill Neck Lizard is 580mm from head to tail.

FLN002

This Frill Neck Lizard is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Frill Neck Lizard is 380mm from head to tail.

FRL001

This Frog siting on a lily pad is made from mild steel, so he will rust. The wire is galvanised so it wont rust. You can bend the wire to the height you need to enable the lilypad to sit just above the water.
The Lily pad is 180mm in diameter

STK061

Mild Steel Garden Stake

This goat stake is 550mm wide, sits 500mm above ground level with a stake that goes down approximately 200mm into the ground.

KOA001

This Koala is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve te metal.
This Koala is 450mm tall and its arms act like bulldog clips which enable it to clip onto tree branches.

KOA002

This Koala is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve te metal.
This Koala is 300mm tall and its arms act like bulldog clips which enable it to clip onto tree branches.

BUL001

Mild Steel

600mm wingspan

DFL001

Mild Steel

600mm wingspan

LYB001

Mild Steel Garden Stake

This Lyre Bird stake is 950mm wide, sits 820mm above ground level with a stake that goes down approximately 200mm into the ground.

STK013

Mild Steel Garden Stake

This cat stake sits approximately 350mm above ground level with a stake that goes down 150mm into the ground.

MUS001

Mushrooms
These Mushrooms are made from mild steel which will rust over time to develop their own unique patina. This rusted surface can then be sealed to preserve the metal.
These Mushrooms stand approximately 300mm tall

PEL001

Mild Steel Garden Stake

This Pelican stake is 400mm wide, sits 700mm above ground level with a stake that goes down approximately 150mm into the ground.

PLT001

This Platypus is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Platypus is 350mm from head to tail.

RET001

Two reeds in a square Dish with a dragonfly and stones.
This piece is made from Mild Steel which will rust.
These Reeds stand approximately 700mm tall.

GA009

This Possum is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve te metal.
This Possum is 350mm long and its arms act like bulldog clips which enable it to clip onto tree branches.

TOR001

Tortoise,
This Tortoise is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Totoise is 360mm from head to tail.

STK067

Mild Steel Stake

This Willie Wagtail stake is 180mm wide, sits 180mm above ground level with a stake that goes down approximately 100mm into the ground.

WOM002

Mild Steel Garden Stake

This cat stake is 450mm wide, sits 300mm above ground level with a stake that goes down approximately 150mm into the ground.

WOM001

Mild Steel Garden Stake

This wombat stake is 290mm wide, sits 200mm above ground level with a stake that goes down approximately 150mm into the ground.

BIL001

This Bilby is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Bilby is 250mm tall.

STK015

This Set of Garden stakes is made from mild steel and consists of 5 leaves and two Flowers. The tallest flower stands 1650mm tall.

WOL001

Wren on Large Leaves.
This sculpture is made of mild steel and will rust.
The leaves stand approximately 600mm tall

Dragonfly on Reed,
This piece is 60 cm tall and is made of mild steel which will rust.

STK016

This Set of Garden stakes is made from mild steel, consists of 6 leaves and stands 1200mm tall.

STK060

Mild Steel Garden Stake

This rooster stake is 400mm wide, sits 400mm above ground level with a stake that goes down approximately 150mm into the ground.

WAL001

Mild Steel Garden Stake

This Wallaby stake is 900mm wide and sits 700mm above ground level with a stake that goes down approximately 200mm into the ground.

GA001

Mild Steel

600mm wingspan

MAG019

Mild Steel

400 mm Long

Comes with magnets on the underside of the feet and a hook for hanging

MAG020

Mild Steel

400 mm Long

Comes with magnets on the underside of the feet and a hook for hanging

MAG021

Mild Steel

400 mm Long

Comes with magnets on the underside of the feet and a hook for hanging

GA005

This Goanna is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This Goanna is 1200mm long. and has a loop on the back to enable you to hang it on a tree or wall.

PHO001

This Wall Art is made from mild steel which will rust over time to develop it's own unique patina. This rusted surface can then be sealed to preserve the metal.
This artwork is 900mm tall

GA022

Mild Steel

This fairy is 150mm tall and will sit on a table, tree branch or anywhere in your garden.

GA023

Mild Steel

150mm high

Comes with a hook on the back for hanging

GA031

Mild Steel

250mm High

Comes with a hook on the back for hanging

GA038

Mild Steel

300mm wingspan

Comes with a hook on the underside for hanging